AH320H

AH320H

Standard Features
  • Back-tilt saw frame design allowing for less blade twist & longer blade life.
  • Oversized hydraulic double column design.
  • Gearbox designed to accept high lateral pressure (no thermal distortion).
  • Variable blade speed drive.
  • Carbide blade guides and bearings provides additional blade support.
  • Motor driven, synchronized wire blade brush .
  • Adjustable flood coolant system.
  • Automatic hydraulic blade tensioning device.
  • Indexing Length Control provides for accurate and easy set up in increments of 0.05 mm (0.001").
  • Cast-iron hydraulic vise.
  • Split vise jaw for reduced burr.
  • Dual valve feed pressure and feed rate system for optimal cutting performance.
  • Automatic work height selector and quick approach bar.
  • Blade speed display.
  • Work light.
Optional Accessories
  • Hydraulic Chip Conveyor
  • Vise Pressure Regulator
  • Hydraulic Top Clamp
  • 2M Roller Table
  • CPC Connect
Get a Quote
Type of Saw
  • Horizontal
Automation
  • Automatic
Miter
  • NO
Automation Type
  • NC
Production Line
  • Horizontal-Column
Capacity-Max. Height (mm)
  • ≦320
Capacity-Max. Width/Throat (mm)
  • ≦380
Capacity-Round (mm)
  • 320
Top Clamp-Min.~Max. Height (mm)
  • 70~140
Blade / Circular Saw Width (mm)
  • 34
Blade Speed Min.~Max. (M/min)
  • 16~104
Model AH-320H
Name Automatic Horizontal Bandsaw
Capacity Max.
Round 320 mm (12.5 in.)
Square 320 mm (12.5 in.)
Rectangular (H x W) 320 x 380 mm
(12.5 x 14.9 in.)
Bundle Cutting Front Top Clamp W: 190 - 300mm
(7.4 - 11.8 in.)
H: 70 - 140 mm
(2.7 - 5.5 in.)
Rear Top Clamp
Saw Blade Speed 16 - 104 m/min (53 - 341 ft/min)
Dimension (L x W x T) 4,240 x 34 x 1.1 mm (167 x 1¼ x 0.042 in.)
Tension Hydraulic with automatic blade breakage detection
Guide Interchangeable tungsten carbide
Cleaning Steel wire brush
Electricity Output Saw Blade Motor 5 HP (3.7 kW)
Hydraulic Pump 1 HP (0.75 kW)
Coolant Pump 1/8 HP (0.09 kW)
Fluid Tank
UNIT: L
Hydraulic Fluid 25 L (6.6 gal)
Coolant Fluid 45 L (11.8 gal)
Vise Clamping Control Method Hydraulic with full stroke cylinder, NC automatic
Minimum Clamping Capacity 0 mm
Remnant Length Manual Mode: 15 mm (0.5") / Auto Mode: 50 mm (1.9")
Feeding Control Method Hydraulic with full stroke cylinder
Single Stroke 403 mm (15.8 in.)
Multiple Stroke 99 M or 999 in.
Workbed Height 790 mm (31.1 in.)
Weight Capacity -------------------------
Weight Net Weight 1,540 kg (3,395 lb)
Cross Weight 1,656 kg (3,650 lb)
Floor Space (L x W x H) 2103 x 2097 x 1671 mm (82 x 82 x 65 in.)

*We reserve the right to modify the specification and design of machine without prior notice.