C-510MNC

Standard Features

Sawhead swivels forward up to 60° via precision pivot system.
Quick angle change with a large protractor and pointer in clear view.
Large discharge table slotted at common cutting angles and built with coolant return.
Inverter controlled variable blade speed drive with worm gearbox.
Automatic work height sensor with position adjustable via a quick lock & release handle.
Adjustable right guide arm for optimum cutting stability at bigger angles.
Full stroke hydraulic front and index vise.
Precision feed pressure & feed rate dual valve.
Automatic hydraulic blade tension device.
7" HMI Touch Screen & Mitsubishi PLC Controller.
100 individual jobs can be programmed and stored.
Automatic kerf compensation.
Save-a-Blade function.
Rapid troubleshooting via error feedback system.

Optional Accessories

Hydraulic shaftless chip conveyor
Hydraulic Top Clamps
Vise Pressure Regulator
Motor amp draw
CPC Connect

Get a Quote

Categories: Miter Saw (Angle – Cutting)

Type of Saw

Horizontal

Automation

Automatic

Miter

Single Miter

Automation Type

Production Line

Horizontal-Mitering
Horizontal-Pivot

Capacity-Max. Height (mm)

≦330

Capacity-Max. Width/Throat (mm)

≦510

Capacity-Round (mm)

Top Clamp-Min.~Max. Height (mm)

180~240

Blade / Circular Saw Width (mm)

Blade Speed Min.~Max. (M/min)

15~100

Model			C-510MNC
Name			Fully Automatic Miter Cutting Bandsaw Machine
Capacity Max.	(Miter) Angle		0°	+45°	+60°
	Round		360 mm (14.1 in.)	330 mm (12.9 in.)	200 mm (7.8 in.)
	Square		-	-	-
	Rectangular (H x W)		330 x 510 mm (12.9 x 20.0 in.)	330 x 330 mm (12.9 x 12.9 in.)	230 x 230 mm (9.0 x 9.0 in.)
	Bundle Cutting	Front Top Clamp	W: 180 - 450 mm (7.0 - 17.7 in.) H: 180 - 240 mm (7.0 - 9.4 in.)	-	-
	Bundle Cutting	Rear Top Clamp		-	-
Saw Blade	Speed		15 - 100 m/min (50 - 328 ft/min)
	Dimension (L x W x T)		4,900 x 34 x 1.1 mm (192.9 x 1¼ x 0.042 in.)
	Pressure		30 - 34 kg/cm² (Tolerance: +1 - +2 kg/cm²)
	Tension		Hydraulic with automatic blade breakage detection 2200 - 2300 kg/cm² (Tolerance: +100 - +150 kg/cm²)
	Guide		Interchangeable tungsten carbide
	Cleaning		Steel wire brush
Electricity Output	Saw Blade Motor		5 HP (3.7 kW)
	Hydraulic Pump		1 HP (0.75 kW)
	Coolant Pump		1/8 HP (0.09 kW)
	Other Components		-------------------------
Fluid Tank UNIT: L	Hydraulic Fluid		36 L (9.5 gal)
Fluid Tank UNIT: L	Coolant Fluid		61 L (16.1 gal)
Vise Clamping	Control Method		Hydraulic with full stroke cylinder
	Minimum Clamping Capacity		0 mm
	Clamping Pressure		15 ~ 28 kg/cm²
Remnant Length			Manual Mode: 65 mm (2.5 in.) / Auto Mode: 210 mm (8.2 in.)
Feeding	Control Method		Hydraulic, NC Automatic
	Vise-clamping Material Pull-Weight		2440 kg (5,379 lb)
	Speed		4.47 cm/s
	Single Stroke		505 mm (19.8 in.)
	Multiple Stroke		99 M or 999 in.
Workbed	Height		800 mm (31.4 in.)
Workbed	Weight Capacity		1345 kg (2,965 lb)
Weight	Net Weight		1,980 kg (4,356 lb)
Weight	Gross Weight		2,125 kg (4,684 lb)
Floor Space	(L x W x H)		3,350 x 2,800 x 2,200 mm (132 x 110 x 87 in.)
Operating Environment	Temperature (°C)		5 - 40°C (41 - 104°F)
Operating Environment	Humidity (%)		30 - 85% (without condensation)