Vertical Bandsaw with Stationary Table Model: 450

We supply all models of the TJAW range, browse through the brochure to find the machine that best suits your machining applications.

Categories:Sawing Machines, T-Jaw Sawing Machines, Vertical Bandsaw with Stationary Table

Specification

ITEMS	MODEL 450
Height Under Guide	254mm 10”
Throat, Band to Column	450mm 18”
Blade Speed	25-117m/min 82-387ft/min
Blade Width	3-15mm 1/8”-5/8”
Blade Length	3570mm 140-1/2”
Size Of Table	565x500mm 22-1/4”x 19-5/8”
Tilt, Main Table	15° R, 15° L 10° F, 10° B
Motor	1HP
Machine Size	1030 x 560 x 1870mm 40-1/2″×22”×73-3/8″
Net Weight	380kgs 836lbs
Ship Weight	460kgs 1012lbs
Packing Size	1120 x 700 x 2050mm 44”×27-1/2″×80-3/4″

*We reserve the right to modify the specification and design of machine without prior notice.
* Colour of the machine may be different from catalogue.

Equipment

Infinitely variable speed.
The band tension is cushioned.
Blade welder and grinder are front mounted for quick, accurate blade repair and installation.
Interchangeable rubber bonded saw wheels.
Brush for cleaning lower drive wheel.
Maintenance-free air pump provides air to remove chips from the point of cut.
The upper wheel could be adjusted for band tensioning.
Hand wheel controlled speed.
Adjustable saw blade guides.
Machine light is fitted.
Change speeds while the machine is in operation, without stopping, without pulley changes.
Cast iron frame to minimize machine vibration.

ACCESSORIES

ACCESSORIES:
Blade welder, shear, grinder, work light, blade guides, chip blower, cleaning brush, infinitely variable speed, rubber bonded saw wheels & magnetic switches.

OPTIONAL ACCESSORIES:
110 Volt Control Lighting