Honsberg Duratec (M51)

Bimetal bandsaw blade made of ~ 4% high chrome alloyed tenacious backing material and a HSS cutting edge made of HSS M51 / material No. 1.3207 with a cobalt content of 10% each having a hardness of ~ 69 HRc.

The higher alloyed cutting edge is designed to cut high strength steel grades. Higher resistance against thermal and abrasive wear increases the blade life especially cutting long cross sections.

Categories:Blades, Blades Honsberg

APPLICATION

Duplex and heat resistant steels
Nickle-base alloys
Aluminium bronze
Titanium alloys
Case hardened steels, spring steels, quenched and tempered steels
Low alloyed hot-working steels
Nitriding steels, high alloyed hot working steels
Unalloyed tool steels
Cold work steels
High-speed steels
Cast iron
Rust- and acid- resistant steels (light)
Rust- and acid- resistant steels (heavy)
Structural steels, deep drawing steels, machining steels
Structural steels, quenched and tempered steels

ADVANTAGES & FEATURES

Extended service life
Lower cutting cost
Heat resistance and wear resistanceFEATURES
Extremely resistant, stable, tough cutting edge
Innovative, state-of-the-art cutting material: M51

Available sizes & pitch

Spectra M42
Blade Width (mm)	Blade Thickness (mm)	Pitch (TPI)
Blade Width (mm)	Blade Thickness (mm)	0.75/1.25	1.1/1.6	1.5/2	2/3	3/4	4/5	4/6
20	0.9mm
27	0.9mm				☑️	☑️	☑️	☑️
34	1.1mm				☑️	☑️		☑️
41	1.3mm			☑️	☑️	☑️		☑️
54	1.6mm		☑️	☑️	☑️	☑️
67	1.6mm	☑️	☑️	☑️	☑️
80	1.6mm	☑️	☑️